← Back
Skip to content
FORECAST DETAILS
FROM THE USDA
Map Unit Setting
- National map unit symbol: 2rzvy
- Elevation: 120 to 1,020 feet
- Mean annual precipitation: 53 to 75 inches
- Mean annual air temperature: 61 to 64 degrees F
- Frost-free period: 250 to 335 days
- Farmland classification: Not prime farmland
Map Unit Composition
- Smithdale and similar soils: 85 percent
- Minor components: 15 percent
- Estimates are based on observations, descriptions, and transects of the mapunit.
Description of Smithdale
Setting
- Landform: Hillslopes
- Landform position (two-dimensional): Backslope
- Landform position (three-dimensional): Side slope
- Down-slope shape: Linear
- Across-slope shape: Linear
- Parent material: Loamy fluviomarine deposits derived from sedimentary rock
Typical profile
- A – 0 to 3 inches: fine sandy loam
- BE – 3 to 16 inches: fine sandy loam
- Bt1 – 16 to 42 inches: sandy clay loam
- Bt2 – 42 to 57 inches: sandy loam
- BC – 57 to 71 inches: sandy loam
- C – 71 to 80 inches: loamy sand
Properties and qualities
- Slope: 15 to 35 percent
- Depth to restrictive feature: More than 80 inches
- Drainage class: Well drained
- Runoff class: High
- Capacity of the most limiting layer to transmit water (Ksat): Moderately high to high (0.60 to 2.00 in/hr)
- Depth to water table: More than 80 inches
- Frequency of flooding: None
- Frequency of ponding: None
- Maximum salinity: Nonsaline to very slightly saline (0.0 to 2.0 mmhos/cm)
- Available water supply, 0 to 60 inches: High (about 9.2 inches)
Interpretive groups
- Land capability classification (irrigated): 7e
- Land capability classification (nonirrigated): 7e
- Hydrologic Soil Group: B
- Hydric soil rating: No
Minor Components
Sweatman
- Percent of map unit: 5 percent
- Landform: Hillslopes
- Landform position (two-dimensional): Backslope
- Landform position (three-dimensional): Side slope
- Down-slope shape: Linear
- Across-slope shape: Convex, linear
- Hydric soil rating: No
Heidel
- Percent of map unit: 5 percent
- Landform: Hillslopes
- Landform position (two-dimensional): Backslope, shoulder
- Landform position (three-dimensional): Side slope
- Down-slope shape: Linear
- Across-slope shape: Convex, linear
- Hydric soil rating: No
Bibb
- Percent of map unit: 5 percent
- Landform: Flood plains
- Landform position (three-dimensional): Tread, dip
- Down-slope shape: Linear
- Across-slope shape: Linear, concave
- Hydric soil rating: Yes